Rare 1985 Camaro IROC-Z Gets a Shot at Life After Sitting for Close to 30 years
The 1985 Chevrolet Camaro IROC-Z had been parked in a storage unit since 1997
Grinding Noise at Low Speed but Brakes Are New
The most common reason your new brake pads are grinding at low speeds is debris, dust, or small rocks stuck between the rotor, pad, and caliper.
Car Jerks When Accelerating From a Stop (No Engine Light)
When the vehicle exhibits fault symptoms that don’t trigger dashboard warning lights, it can be a little concerning.
Car Shakes at 40–60 Mph but Stops Above 70 Mph
An owner on Reddit inquiring about similar shakes discovered that all their vehicle’s tires were worn out from the inside and even had protruding wires.
Why Cold-Weather Ice Buildup Around Sensors Triggers ABS/TC Lights (Simple Fixes)
Moisture and condensation around the connectors or sensors can freeze and interrupt signal readings, sending erratic signals.
Why Aftermarket Wheels/Tires Can Confuse the ABS Ring and Trigger Warnings
Staggered setups are popular among performance car aficionados; however, installing different sizes on different axles will confuse the ABS computer
Why Changing Tires Can Trigger the ABS/Traction Control Light (What To Check)
When your vehicle’s safety systems detect a mismatch in wheel speeds, it assumes there’s a slip or fault and triggers the warning signs on your dashboard.
How a Bad Brake Light Switch Can Trigger ABS and TC Warnings (and Cost You a Lot)
When your brake light switch is bad, your vehicle’s computer may think you are constantly braking (or never braking).
When the Brake Pedal Feels Soft: Diagnosing ABS Vacuum-Pump Failure
While often overlooked, this can be a symptom of a failing ABS pump.
Why Does My Car’s Traction Control Cut Engine Power at Low Speed? (And How To Fix)
Another reason your Traction Control cuts engine power at low speeds is a dirty, failing, or misaligned ABS tone ring.
