Your Chevrolet Silverado Control Arm Bushing, commonly referred to as an A-arm, is a suspension component found on practically all road-going vehicles. It is the suspension link that connects your Chevrolet Silverado wheel hub and the steering knuckles to your car’s chassis.
How the Control Arm Functions
Your Chevrolet Silverado Control Arm Bushing is normally fitted with bushings and ball joints that allow it to flex and move according to the road conditions and the steering input from your driving.
Your Chevrolet Silverado Control Arm Bushing will wear out after extensive use and due to wear and tear, and if neglected, it could cause all sorts of problems for your vehicle.
A faulty control Arm Bushing often produces a few symptoms that alert the driver to a potential problem that might need to be fixed or serviced by a local mechanic.
Symptoms of a Bad or Failing Chevrolet Silverado Control Arm Bushing
One of the first symptoms commonly associated with a bad control arm is vibrations felt on the steering wheel while driving.
- Wheel Shimmy: If your bushings or ball joints on your control arm become excessively worn, this could cause wheel shimmy, which normally causes vibrations that can be felt in the car’s wheels. These vibrations might often increase with acceleration and will smoothen out once you are at speed.
- Steering Wandering: Another symptom that your Control Arm Bushing may be worn out is steering wandering. This is another common cause of a worn-out Control arm bushing.
- Shifty Alignment: Excessively worn-out bushings and ball joints will cause the vehicle’s alignment to shift, causing the steering wheel to either pull right or left while driving down the road. This normally requires constant correction from the driver.
- Clunky Noises: If your vehicle is making clunking noises from the wheel, then it could be a possible symptom of a problem with your Chevrolet Silverado Control Arm Bushing. When the bushings and ballpoints develop excessive play or looseness, they knock when the vehicle is in motion. This noise will get louder as the components wear out and eventually break.
Chevrolet Silverado Arm Bushing Cost
The best line of action when your Chevrolet Silverado Control Arm Bushing is faulty is a replacement.
If you suspect that your Control Arm Bushing might be faulty, it’s important that you get an immediate personalized quote based on your location, the make, model, and the year of your Chevy.
When it comes to replacing your Chevrolet Control Arm Bushing, it’s advisable that you get it from a reliable online retailer.
